Articulated Haulers
- Replace Engine w/VOLVO remanufactured engine, including new mounts, intakes, fuel lines, clean/replace charge air cooler if necessary
- Replace Transmission w/VOLVO remanufactured transmission, including coolers
- Replace Transfer Gearbox (Drop Box) w/VOLVO remanufactured unit and replace mounts
- Pump drive/PTO: inspect & replace bearings, seals & drive flexplate
- Radiator: clean & presure test, replace coolant hoses
- Final Drives will go through a re-bearing & reseal process: replace all bearing cups & cones; all needle bearings & bushings, all seals & gaskets
- Differentials: perform a thorough re-bearing and reseal process - replace all bearing cups and cones, replace all seals and gaskets
- Brakes:
- Parking: replace pads, reseal
- Wet or dry: inspect condition, quote repairs if needed
- Drive Shafts: replace u-joints, prop shafts to be high speed balanced
- Intermediate shaft: replace bearings & reseal
- Axle shafts: inspect
- Replace operator seat & seat belts
- Clean, paint and decal machine
- Replace all filters and fluid
Plus items found during inspection or tear down that are found to be in need of repair/replacement and agreed to repair or replace by customer. The customer will determine which systems to include in the refurbishment & which to omit.
Warranty
- 1 year/2500 hours (whichever occurs 1st) on Reman components and replaced drive train specific parts/components
- 1 year/1500 hours on OEM parts replaced (whichever occurs 1st)
Wheel Loaders
- Replace Engine w/VOLVO remanufactured engine including new mounts, intakes & fuel lines, clean/replace charge air cooler if necessary
- Replace Transmission w/VOLVO remanufactured transmission, including, coolers
- Rebuild Trunions: rebush & reseal
- Radiator: clean & presure test, replace coolant hoses
- Axle shafts: inspect
- Final Drives will go through a re-bearing & reseal process: replace all bearing cups & cones; all needle bearings & bushings, all seals & gaskets
- Differentials: perform a thorough re-bearing and reseal process - replace all bearing cups and cones, replace all seals and gaskets
- Brakes:
- Parking: replace pads, reseal
- Wet or dry: inspect condition, quote repairs if needed
- Drive Shafts: replace u-joints, prop shafts to be high speed balanced
- Intermediate shaft: replace bearings & reseal
- Axle shafts: inspect
- Replace operators seat & seat belts
- Clean, paint & decal machine
- Replace all filters and fluids
Plus items found during inspection or tear down that are found to be in need of repair/replacement and agreed to repair or replace by customer. The customer will determine which systems to include in the refurbishment & which to omit.
Warranty
- 1 year/2500 hours (whichever occurs 1st) on Reman components and replaced drive train specific parts/components
- 1 year/1500 hours on OEM parts replaced (whichever occurs 1st)