Volvo Attachments – Buckets

Get your fill without the spill

Featuring an easy to fill geometry, Volvo buckets provide a large opening for maximum material heap and less spillage.  High-grade steels provide the strength and flexibility necessary for operating in severe and varying work conditions.  And minimum attachment weight means better stability and heavier work loads. 

  • General Purpose Straight Edge Bucket has an angled floor for good penetration and excellent fill factors.  It can be equipped with either bolt-on edge savers or teeth for effective use in many different applications or materials.  Recommended for loading sand, gravel or other materials from banks or stockpiles.  Volume range 1,2 – 8,3 m3 (1,6 – 10,9 yd3) (Available for Models L50E, L60E, L70E, L90E, L110E, L120E, L150E, L180E, L220E, L330E)
     
  • Flat Floor Straight Edge Bucket has a smooth, flat floor, good for maintaining a clean and level work area.  This bucket type can be fitted with bolt-on edge savers or teeth and is recommended for loading trucks from banks or stockpiles.  Volume range 1,4 – 4,2 m3 (1,8 – 5,5 yd3) (Available for Models L50E, L60E, L70E, L90E, L110E, L120E, L150E)
     
  • Grading Bucket is designed with a long, smooth floor and a short, straight edge on the back for fine grading work.  This bucket is especially useful in earthmoving work, such as topsoil stripping, small-scale dozing, landscaping, and leveling of fill.  Volume range 1,6 – 2,1 m3 (2,1 – 2,7 yd3) (Available for Models L50E, L60E, L70E, L90E)
     
  • Straight Edge Rock Bucket is good for removing easily broken material from banks that require higher penetration and breakout capacity.  The straight edge gives better dump height and load retention than a Spade Nose Bucket.  It can be equipped with either bolt-on edge savers or teeth in combination with segments.  Volume range 3,0 – 6,9 m3 (3,9 – 9,0 yd3) (Available for Models L110E, L120E, L150E, L180E, L220E, L330E)
  • Spade Nose Rock Bucket is the best choice for breaking out hard and stony material or blasted rock.  It is most commonly fitted with teeth and segments, but when loading gravel, crushed rock or ore, it can be fitted with bolt-on edge savers.  Volume range 1,2 – 7,5 m3 (1,6 – 9,8 yd3) (Available for Models L50E, L60E, L70E, L90E, L110E, L120E, L150E, L180E, L220E, L330E)

  • Light Material Bucket has high capacity for handling low density materials, such as snow, coal, or wood chips.  This bucket is equipped with a bolt-on edge saver as standard equipment.  Volume range 2,2 – 14,0 m3 (2,9 – 18,3 yd3) (Available for Models L50E, L60E, L70E, L90E, L110E, L120E, L150E, L180E, L220E, L330E)

  • Refuse Bucket is specifically designed for waste handling.  With high strength steel and a spill guard optimized for maximum visibility, these buckets are made to move waste quickly, efficiently, and safely.  Bolt-on steel or rubber edge savers are available for improved bucket protection.  Volume range 3,1 – 10,7 m3 (4,1 – 14,0 yd3) (Available for Models L60E, L70E, L90E, L110E, L120E, L150E, L180E, L220E)

  • Hi-Tip Light Material Bucket features increased dump height over standard light material buckets because it is hydraulically lifted from a built-in frame.  The Hi-Tip bucket has high capacity for low-density materials and a standard equipment bolt-on edge saver.  Note: This bucket requires 3rd hydraulic function.  Volume range 1,8 – 13,0 m3 (2,4 – 17,0 yd3) (Available for Models L50E, L60E, L70E, L90E, L110E, L120E, L150E, L180E, L220E)
     

 

NOTE: Not a complete list of available attachment options. For more information about additional attachments, or to find out how you can customize your wheel loader to meet your exact needs, contact your local dealer.